how to make friendship bracelets with letters transport to how long|carabiner keychain
eutron stars that intermittently emit radio waves that last only two milliseconds, and black crevices that last three hours. This is a process of change, so we can express it by the mutil color silk print method. We can print the starburst on the surface of bracelet with the silicone based ink. We make a unique printed mold for one design. The lines of the logo is printable clearly with the smallest 0.1mm width. This kind of silicone bracelet is especially suitable for personalizing complex logo. And it touches smooth the printed bracelet style. Also there is an option to make the wrapper with starburst also. Order less than 100pcs, get 50pcs free and 5pcs keychains free. Order 100pcs or more, get 100pcs free and 10pcs keychains free. All the free wristbands and keychains are same design of the one you order. carabiner keychainhttps://www.wristbands-australia.com/upload/2019/20190613/155202_9082.png" width="350" height="350"> e customer are holding ready-made products for Soft-hardness comparison directcarabiner keychainly and then choose one of them . In nowadays the custom silicone bracelets is one of them. So how to choose the hardness for custom silicone bracelets . The choice of softness and hardness of silica gel will have different effects on the properties of different products . At present, the hardness of commonly used silica gel hand rings is between 40 degrees and 60 degrees and material with different hardness has certain difference . For example , the tensile rate of 40 degree materials will reach about 150% , and the tensile rate 60 degree materials can only reach about 80% . So in order to confirm the functionality of products , we have to test them . It is more difficult to produce high hardness silica gel hand rings . For the manufacturers of silica gel hand rings , the higher the hardness , the higher the defective rate of the products and the pulling force of the products will also be affected and will cause fracture phenomenon at any time . Therefore , we suggest that the hardness of the silica gel hand rings should not be too high .